This position is open for domestic candidates only. 

• Benefits on Day One
• Matching 401k up to 6%
• Weekly Production Bonuses
• Tuition Reimbursement

Operate all mobile equipment including loaders, man-lifts, forklifts, flatbed trucks and others to transport Melt Shop and/or Refractory materials.  Assist other Melt Shop personnel as instructed.   

Primary Duties and Responsibilities:

1. Operate mobile equipment including loaders, man-lifts, forklifts, and flatbed trucks to lift and transport materials. 
2. Perform daily preventative maintenance on vehicles and mobile equipment, which includes fueling, cleaning, and checking/adding fluids as needed.
3. Ensure loads are within the safe load capacity of each piece of mobile equipment.
4. Maintain material in feed hoppers or bins at an adequate operating level.
5. Keep constant communication with Melt Shop Team and AMT operations to monitor alloy levels.
6. Assist Melt Shop Operations and Refractory area with crusher operations and cleaning as needed.
7. Visually inspect materials for non-conformities.

Additional Responsibilities:

1. Communicate problems to responsible personnel in a timely manner.
2. Follow all PPE requirements and safety rules and guidelines for all tasks being performed.
3. Maintain communication with coworkers through two-way radio and hand signals.
4. Demonstrate ability and willingness to work as part of a self-directed team with limited supervision. 
5. Maintain work areas and equipment in clean and orderly condition.
6. Exhibit engagement in GBS tools and methodology.
7. Assist coworkers as needed.
8. Perform all other duties as assigned.

Education/Experience:

• Basic computer and math skills. 
• Read, write and speak in English. 
• 1-3 years mobile equipment experience preferred.  

Physical Requirements:

• Ability to climb stairs, climb ladders, reach, squat, tolerate prolonged standing/walking, balance, bend, operate mobile equipment, crawl, kneel, and push and pull objects.
• Ability to reach, squat, and tolerate prolonged sitting.
• Ability to lift up to 70 lbs.
• Ability to operate hand controls with both hands and foot pedals with both feet.
• Ability to perform sustained overhead reaching.
• Ability to work in extreme ambient temperatures up to 160°F.
• Ability to work in cramped quarters and at heights.
• Ability to work a rotating shift schedule including days, nights and weekends.
• Ability to tolerate working in areas where noise levels can reach 120 decibels.

The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Job Summary:

Move finished product from rolling mill to staging area for outbound shipments with the use of mobile or material handling equipment. Assist in a variety of functions related to the Logistics Department including inventory and quality checks.

Primary Duties and Responsibilities:

1. Perform a variety of tasks, which are routine in nature, and which require exercising care in the operation of mobile equipment, handling materials safely, and loading appropriate products in designated areas.
2. Transfer stacked and bundled materials from end of rolling mill finishing operations to stock area:
   1. Store materials according to product, grade, size, and heat number.
   2. Rotate warehouse stock materials to make room for new product
   3. Communicate material locations for inventory accuracy.
3. Operate material handling equipment to lift, move, and position product.
4. Observe items for conformity regarding product size, type, and length. Looks for quality issues that can be detected with the visible eye and reports issue to the Quality department.
5. Assist in physical inventory counts and daily inventory spot checks.
6. Perform other duties and work assignments as required and directed. This position may be required to help and fill for other Logistics positions and job duties on a temporary basis.

Additional Responsibilities:

1. Ensure daily preventative maintenance is performed on vehicles and mobile equipment, which may include fueling, cleaning, and checking/adding fluids as needed.
2. Follow all PPE requirements and safety rules/guidelines for all tasks being performed.
3. Assist in training of coworkers as needed.
4. Execute general 5S activities in the work area.
5. Perform all other duties as assigned.

Education/Experience:

• High school diploma or GED.
• Completed Gerdau safety training.
• Completed Gerdau forklift certification training and electric overhead crane training.

1-2 years manufacturing experience is preferred.

Physical Requirements:

• Ability to climb stairs, climb ladders, reach, squat, tolerate prolonged standing or walking, balance, bend from trunk, operate mobile equipment, crawl, kneel, push, and pull objects.
• Ability to frequently lift objects up to 15 lbs. and dunnage up to 50 lbs.
• Ability to frequently mount and dismount forklifts and cranes.
• Have passed an “applicable fit for duty” exam.

The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified.

Job Summary:

The Mobile Equipment Operator yard will operate mobile crane, magnet crane, mobile shear, and stationary shear to process scrap materials, load and unload scrap from trucks or railcars, and move scrap within the yard as required.

Primary Duties and Responsibilities:

• Follow all established Gerdau Safety, Environmental, and Routine procedures specific to the yard.
• Inspects mobile shear, magnet crane, and stationary shear daily and documents on checklists to ensure equipment is maintained and in proper working order.   
• Performs daily preventive maintenance on equipment to ensure proper working order such as lubrication, greasing, fueling, and keeping cab clean.       
• Inspects for proper scrap grade and safety and environmental concerns such as tanks, cylinders, etc. while shearing.
• Shear unprepared material into prepared state identifying size, thickness, and physical dimensions.
• Use magnet crane to load/unload scrap from customer vehicles into appropriate piles or railcars in order to process for shipping.
• Use mobile equipment to lift and move scrap from one area of the yard to another.

Additional Responsibilities:

• Assist with yard housekeeping efforts and perform other duties and work assignments as required and directed.
• Assist co-workers in daily operational duties that are essential to the yard in terms of safety, efficiency, and profitability.
• Problem solving input and contributions as required.

Qualifications and Experience:

• High School Education/GED preferred.
• Desire to enhance skills and knowledge to develop as a Gerdau employee
• Promote and practice the core values of Gerdau

Salary & Benefits:

• Medical and Prescription
• Dental
• Vision
• Pension/RSP plan
• Basic Life/Accidental Life Insurance
• Employee Assistance Program
• Tuition Reimbursement Program

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. All external applicants must be legally eligible to immediately work in the country of hire without current or future sponsorship. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

This position is open to domestic candidates only.

PROGRAM DESCRIPTION

Gerdau Charlotte Mill is seeking college students to participate in our, G.Start program. G.Start is a paid internship program with the goal of developing students for future technical and managerial positions G.Start internships are project-focused and mutually-beneficial. G.Start is a program that values the diversity and inclusion of our business and society.

Gerdau is looking for G.Start candidates who have an eagerness to grow personally and professionally, being a part of a global company with more than 120 years of entrepreneurship and achievements in the steel industry. This program is for individuals with high learning agility and willingness to adapt and develop continuously, who aim at consistently outperforming in a variety of settings and circumstances.

Who We Are

Gerdau is a major steel manufacturing company, operating in 10 countries, and employing over 30,000 individuals.  The North American business divisions (Gerdau Long Steel North America and Gerdau Specialty Steel North America) produce long and special steel products for the agriculture, energy, industrial, automotive, and manufacturing markets. We stimulate the economy through our network of recycling operations and mills, operating ten mills in the U.S. and three in Canada. Our mills utilize efficient and clean production practices, including the use of electric arc furnace (EAF) technology. The use of this technology and its process makes our steel one of the greenest choices available. 

Opportunities to Learn

• Microsoft suite, AutoCAD, etc.

Job Responsibilities and the Individual

• An Intern with Gerdau must have an eagerness to grow personally and professionally, being a part of a global company with more than 120 years of entrepreneurship and achievements in the steel industry. This program is for individuals with high learning agility and willingness to adapt and develop continuously, who aim at consistently outperforming in a variety of settings and circumstances.
• Undergraduate entering Junior or Senior year.
• Pursing a degree in Mechanical Engineering (Mechanical, Electrical, Materials Science or Automation) or related degree from a recognized accredited college or university.
• Record of high academic achievement (Minimum GPA 2.5, preferred GPA 3.0 or higher).
• Well-rounded applicants with leadership roles in student organizations or extra-curricular activities.
• Must be legally authorized to work full-time in the country of hire without requiring current or future sponsorship for employment.
• Candidates much demonstrate leadership potential, strong interpersonal skills, excellent written and oral communication skills, initiative, and problem-solving skills.

 Start shaping the future with us!

Empowering people who build the future.

About Us:

Gerdau is a major steel manufacturing company, operating in 10 countries, and employing over 30,000 individuals.  The North American business divisions (Gerdau Long Steel North America and Gerdau Specialty Steel North America) produce long and special steel products for the agriculture, energy, industrial, automotive, and manufacturing markets. We stimulate the economy through our network of recycling operations and mills, operating ten mills in the U.S. and three in Canada. Our mills utilize efficient and clean production practices, including the use of electric arc furnace (EAF) technology. The use of this technology and its process makes our steel one of the greenest choices available. 

Why you'll love it here:

At Gerdau, we want our people to know their value and worth as professionals and global citizens. Our company’s purpose reflects that sentiment: Empowering people who build the future.  Regardless of an employee’s role within the organization, we want everyone to recognize the contributions and attributes they bring to Gerdau can greatly impact our success as a company. 

G.Future: Gerdau’s Next Generation of Leaders

To invest in our junior talent, Gerdau proudly offers G.Future, a program designed to develop future leaders for the company. As members of this leadership program

,

• G.Futures will be responsible for solving large- and small-scale problems. Examples include: Creating Mechanical components/assembly drawing(s), proposing business methods to optimize product output and redirect process prioritization to improve current production standards. 

• Work as a leader managing the strategic implementation for overall business goals.  
• G.Future also offers a Mentorship Program, a unique feature designed to help participants build a successful career. Your mentor will be a seasoned professional within the company who will facilitate your integration with Gerdau, help you understand Gerdau’s values and business culture and streamline your training by providing you technical knowledge and business vision. 
• Visit our customers and suppliers to gain In-depth knowledge of our business from beginning to end. 
• Gain a holistic view and acumen of the industry by working with each level of Gerdau North America, as well as travel to various destinations throughout the US and Canada.   
• Further your development by interacting with other G.Futures from across North America while tackling some of the organization’s biggest challenges.  

• Grow a set of managerial, interpersonal, analytical, and technical skills.
• Work with software such as AutoCad, AutoCAd Inventor, SAP, PLEX and excel. 

Requirements

• Bachelor’s degree in:
  • • Mechanical, Electrical, Chemical, Industrial Engineering
    • Material Sciences/Metallurgy
    • Or other applicable degree
• Recent college graduate within the last two years - recently completed or be in the process of completing degree before program starts  

• Record of high academic achievement (Minimum GPA 2.5, preferred GPA 3.0 or higher) 
• Preference for those with a degree-related internship experience 
• Well-rounded applicants with leadership roles in student organizations or extra-curricular activities 
• A high learning agility and willingness to adapt and develop continuously 
• Must be legally authorized to work in the United States without requiring current or future sponsorship for employment 
• Ability to travel to various locations within the United States and Canada during the length of the program

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Empowering people who build the future.

PROGRAM DESCRIPTION

Gerdau is seeking college students to participate in our, G.Start program. G.Start is a paid internship program with the goal of developing students for future technical and managerial positions G.Start internships are project-focused and mutually-beneficial. G.Start is a program that values the diversity and inclusion of our business and society.

Gerdau is looking for G.Start candidates who have an eagerness to grow personally and professionally, being a part of a global company with more than 120 years of entrepreneurship and achievements in the steel industry. This program is for individuals with high learning agility and willingness to adapt and develop continuously, who aim at consistently outperforming in a variety of settings and circumstances.

Who We Are

Gerdau is a major steel manufacturing company, operating in 10 countries, and employing over 30,000 individuals.  The North American business divisions (Gerdau Long Steel North America and Gerdau Specialty Steel North America) produce long and special steel products for the agriculture, energy, industrial, automotive, and manufacturing markets. We stimulate the economy through our network of recycling operations and mills, operating ten mills in the U.S. and three in Canada. Our mills utilize efficient and clean production practices, including the use of electric arc furnace (EAF) technology. The use of this technology and its process makes our steel one of the greenest choices available. 

Opportunities to Learn

• Insert softwares used in this role (e.g. Microsoft suite, CAPEX, etc.)

Job Responsibilities and the Individual

An Intern with Gerdau must have an eagerness to grow personally and professionally, being a part of a global company with more than 110 years of entrepreneurship and achievements in the steel industry. This program is for individuals with high learning agility and willingness to adapt and develop continuously, who aim at consistently outperforming in a variety of settings and circumstances.

• Undergraduate entering Junior or Senior year.
• Pursing a degree in Mechanical, Electrical, Materials Science or Metallurgy Engineering or related from a recognized accredited college or university.
• Record of high academic achievement (Minimum GPA 2.5, preferred GPA 3.0 or higher).
• Well-rounded applicants with leadership roles in student organizations or extra-curricular activities.
• Must be legally authorized to work full-time in the country of hire without requiring current or future sponsorship for employment.
• Candidates much demonstrate leadership potential, strong interpersonal skills, excellent written and oral communication skills, initiative, and problem-solving skill

Start shaping the future with us!

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Empowering people who build the future.

PROGRAM DESCRIPTION

Gerdau is seeking college students to participate in our, G.Start program. G.Start is a paid internship program with the goal of developing students for future technical and managerial positions G.Start internships are project-focused and mutually-beneficial. G.Start is a program that values the diversity and inclusion of our business and society.

Gerdau is looking for G.Start candidates who have an eagerness to grow personally and professionally, being a part of a global company with more than 120 years of entrepreneurship and achievements in the steel industry. This program is for individuals with high learning agility and willingness to adapt and develop continuously, who aim at consistently outperforming in a variety of settings and circumstances.

Who We Are

Gerdau is a major steel manufacturing company, operating in 10 countries, and employing over 30,000 individuals.  The North American business divisions (Gerdau Long Steel North America and Gerdau Specialty Steel North America) produce long and special steel products for the agriculture, energy, industrial, automotive, and manufacturing markets. We stimulate the economy through our network of recycling operations and mills, operating ten mills in the U.S. and three in Canada. Our mills utilize efficient and clean production practices, including the use of electric arc furnace (EAF) technology. The use of this technology and its process makes our steel one of the greenest choices available. 

Opportunities to Learn

• Microsoft suite, CAPEX, SolidWorks, and more!

Job Responsibilities and the Individual

• Undergraduate entering Junior or Senior year.
• Pursing a degree in Mechanical, Electrical, Chemical, Industrial, Materials Science or Metallurgy Engineering or related from a recognized accredited college or university.
• Record of high academic achievement (Minimum GPA 2.5, preferred GPA 3.0 or higher).
• Well-rounded applicants with leadership roles in student organizations or extra-curricular activities.
• Must be legally authorized to work full-time in the country of hire without requiring current or future sponsorship for employment.
• Candidates much demonstrate leadership potential, strong interpersonal skills, excellent written and oral communication skills, initiative, and problem-solving skills.

Start shaping the future with us!  

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

BASIC FUNCTION (Primary Purpose):

This jobs primary function is to build relationships with customers and help support the sale of Gerdau product(s) to our customers (i.e., revenue generation)

Primary Duties & Responsibilities:

Scope (brief description)

This position will be responsible for sales and volume within a specific territory and for a specific product line(s).  This position will have established sales goals/quotas (volume, forecast accuracy) to attain within his/her territory.  The approximate size/volume of territory is greater than 10,000 tons per month. The mix of customers and tons can vary greatly from territory to territory and product to product.

Supervisory Responsibilities & Reporting Structure

• Supervises who (level and number):  None
• Reports to:  Sales Manager

Qualifications and Educational requirement(s):

Five or more years of sales experience and a four year degree from an accredited college or university

Preferred experience in the following industries (not required): 1. Steel, 2. Metals Manufacturing, 3. Commodities pertaining to the steel industry, 4. Metals Distribution/Service Centers, 5. General Manufacturing (industrial, car).

Preferred degree in the following areas (not required):  1. Business with Sales and Marketing emphasis, 2. Engineering or Material sciences

Approximately 75% travel

Level Differentiators (RSR I vs RSR II):

Type of customers are categorized into A, B, C or D categories based on various factors (no one factor to use for all customers): Volume, frequency of buying, profitability, strategic outlook (long vs. short term longevity)

Metrics for success:

1. Forecast Accuracy
2. Hitting volume/tons and prices goals (revenue)
3. Developing strong relationships with customers while balancing Gerdau’s needs

Do you have a working knowledge of manufacturing tools and procedures? Are you detail-oriented with the ability to organize and prioritize? Do you like operating heavy mobile equipment? Join us in our cultural and digital transformation to build the future and the Gerdau We Are Creating.

$19.72 an hour and after 90 days increases to $24.59 an hr, plus biweekly production bonus, shift premiums, and 354 annual hours of built in overtime.

We Have: 

• A strong global presence with steel mills that transform millions of metric tons of raw material to produce steel beams, flat-rolled steel, merchant bar, rebar, spikes, and wire used by the automotive industry, appliance, construction, machinery, and equipment industries.    
• A culture that welcomes diversity, encourages innovation and creates products that serve humanity.  
• An environment that values teamwork, safety, and sustainability. 
• A commitment to continuous improvement and the belief that we can create a better future for our employees and our global community by investing in people, processes, and technology. 

We Offer:

• Comprehensive Medical, Prescription, Dental, Vision Plans – Eligible upon 1st day of hire 
• Health & Dependent Care (Flexible Spending Account) 
• 100% Matching 401K up to 6% 
• Life/Accidental Life Insurance 
• Health Advocate Services 
• Employee Assistance Program 
• Tuition Reimbursement Program
• Career Path System and Training
• An empowering and open culture with the opportunity to grow and create 

You Have: 

• High School Diploma or GED
• Basic computer and math skills
• 1-2 years of industrial/manufacturing experience. Casting and pouring molten metal experience a plus!
• Ability to read, write, and follow instructions
• Ability to use simple specifications, dials, and gauges to regulate electricity and water flow.
• Flexibility to work a rotating 12 hr shift, days, nights, and weekends 
• Ability to climb stairs, climb ladders, reach, squat, tolerate prolonged sitting, standing or walking, balance, bend, operate mobile equipment, crawl, kneel, lift up to 50 lbs.
• Ability to work in cramped quarters, heights, extreme temperature conditions.
• Demonstrate the ability and willingness to work as part of a self-directed team with limited supervision. 

Your Purpose:

Perform all operations necessary in the preparation and use of slide gates and ladles involved in the Melt Shop functions of tapping, refining, pouring, and casting heats.  Coordinate transportation of ladles in and out of the shop to ensure the proper amount is available.  Follow prescribed methods, procedures, instructions, and sequence of operations.

Your Work:

• Work involves a complete range of duties that are highly repetitive and routine in nature to properly and effectively set up ladles to efficiently pour molten metal. 
• Set up slide gates.  Replace ladle nozzles, patch well block, porous plug, slide gate refractories, and stir pipe when necessary. 
• Inspect slide gate refractories, mechanical components, and nozzles for defects and wear.  Turn, replace, clean, and lubricate the slide gate as required. 
• Inspect ladle lining and handling accessories, including ladle preheater.  Check porous plugs with gas for flow and wear and make changes or repairs, patch block as needed. 
• Inspects hydraulic fittings and hoses and replace them when needed. 
• Operate ladle preheaters, check ladle temperatures, and keep ladles properly heated for furnace tapping. 
• Direct ladle transfer movement and placement for furnace tapping. 
• Add sand mixture to the ladle as needed to ensure the highest percentage possible of free opens.
• Use oxygen lance to melt out skulls from the ladle, clean out ladle nozzle bores and porous lug, and to lance open slide gates as required.
• Perform and document down day activities.
• Operate mobile equipment to lift and transport materials including loaders, makeup cart, brick-lift, and forklifts.
• Ensure daily preventative maintenance is performed on vehicles/mobile equipment to include fueling, cleaning, checking, and adding fluid as needed.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Manufacturing Associate – Shipping Crane Operator (Dupont Schedule)

Starting pay $24.70 / hour plus bonus and increase after trained to $25.70, with an estimated average earning of $68000 - $80000 / year. Generous benefits start on your first day.

Do you have a working knowledge of manufacturing tools and procedures? Are you detail-oriented with the ability to organize and prioritize? Do you want the opportunity to learn different roles? Join us as we empower the future.

We Have: 

• A strong global presence with steel mills that transform millions of metric tons of raw material to produce steel beams, flat-rolled steel, merchant bar, rebar, spikes, and wire used by the auto industry, appliance, construction, machinery, and equipment industries.    
• A culture that welcomes diversity, encourages innovation and creates products that serve humanity.  
• An environment that values teamwork, safety, and sustainability. 
• A commitment to continuous improvement and the belief that we can create a better future for our employees and our global community by investing in people, processes, and technology. 

We Offer:

• Comprehensive Medical, Prescription, Dental, Vision Plans – Eligible upon 1st day of hire 
• Health & Dependent Care (Flexible Spending Account) 
• 100% Matching 401K up to 6% 
• Life/Accidental Life Insurance 
• Bonuses 
• Health Advocate Services 
• Employee Assistance Program 
• Tuition Reimbursement Program 
• Career Path System and Training 
• An empowering and open culture with the opportunity to grow and create

You Have: 

• The desire to learn new roles and grow with the company.
• High School Diploma or GED.
• 1-3 years of industrial or manufacturing experience operating an overhead crane and forklift.
• The ability to work a 12-hour rotating schedule (Dupont)
• Basic computer skills. 
• Basic math skills, problem-solving, ability to multi-task.

Your Purpose:

Operate overhead electric bridge crane with hoist and operator’s cab mounted on bridge which runs along overhead tracks to lift, move, and place metal bar stock.  Follow standard or prescribed methods, procedures, and instructions.  Also operate forklift, trackmobile and switch tractor as necessary.

Your Work:

• Operate overhead cab crane working in close proximity and in cooperation with Stock Hitcher and checker loader to load and unload material or equipment from trucks, with or without side panels, rail cars, shuttles, receiving direction from ship checker loader or supervisor. Requires considerable care and diligence in operation of overhead cranes to ensure safety of others and the proper loading of material.
• Transfer stock length bars from shuttle cars into storage areas or railcars and trucks.
• Perform routine maintenance checks on crane prior to operation.  Detect and report any instructions of equipment malfunction.
• Visually inspect or detect indications of slipping or shifting loads, incorrect hitching or faulty sling, faulty load placement, or faulty stacking.
• Locate bundled and tagged bars as identified on loading schedule or by checker loader.  Designate specific vehicle for load.  As loaded, weight is distributed between axles at tractor and trailer making certain that axle weight does not exceed current DOT limits.
• Duties involve prompt attention to hand signals to ensure safe and proper loading and unloading of material as well as using care in picking up load clearing obstacles, properly positioning and handling loads and manipulating levers to avoid excessive swinging.
• Perform other duties such as stock hitching, placing or storing dunnage, and operating hem saw as needed or directed.
• Use fork truck or crane to transfer dunnage storage areas into warehouse.

We Have

• A strong global presence with steel mills that transform millions of metric tons of raw material to produce steel beams, flat-rolled steel, merchant bar, rebar, spikes, and wire used by the auto industry, appliance, construction, machinery, and equipment industries.    

• A culture that welcomes diversity, encourages innovation and creates products that serve humanity.  

• An environment that values teamwork, safety, and sustainability. 

• A commitment to continuous improvement and the belief that we can create a better future for our employees and our global community by investing in people, processes, and technology. 

We Offer

• Comprehensive Medical, Prescription, Dental, Vision Plans – Eligible upon 1st day of hire 
• Health & Dependent Care (Flexible Spending Account) 
• 100% Matching 401K up to 6% 
• Life/Accidental Life Insurance 
• Bonus
• Health Advocate Services 
• Employee Assistance Program 
• Tuition Reimbursement Program 
• Career Path System and Professional Training 
• An empowering and open culture with the opportunity to grow and create

Your Qualifications

• HS diploma or GED required.
• Associate or Bachelor’s degree in Business, Technical, or related degree preferred.
• Minimum of 10 years of melt shop experience required and preferred casting experience.
• Exposure to standardization and production quality methods in a leadership role.
• Previous experience in a leadership position required and the ability to train people and serve as a coach to employees. 
• Must possess good communication skills, have the ability to articulate ideas, give feedback, resolve conflicts, and point out areas where improvement is needed, as well as the ability to develop a positive relationship with employees in order to develop credibility.
• Must be results-oriented and have the ability to motivate others

Your Purpose

You will be responsible for the casting side of the melt shop production area including the mold shop. This role has 4 direct reports, but will oversee approximately 24 hourly employees, 4 shift supervisors and contractors. The Casting Foreman will assist the Melt Shop Superintendent, directing and guiding shift supervisors to ensure a safe, well kept, and highly productive working environment. This position will report to the Melt Shop Superintendent. 

Your Work

• Must be able to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
• Must be able to display a high level of proactivity, determination and discipline, as well as working in a highly connected team environment.
• Will assist in the overall growth and development of the Melt Shop Team and will work with other areas to ensure consistency and long-term success.
• Will promote a culture of ownership, engagement, teamwork and innovation to drive continuous improvement, always leading by example.
• Will serve as a resource for the operating crews and will establish expectations, develop best practices for the area, and ensure consistency. Will select, train, evaluate, discipline, and engage personnel.
• Will advise and instruct shift supervisors and hourly employees on objectives or issues regarding schedules, methods, standards, materials, quality, shipping, equipment, tooling, safety, cost, discipline, personnel policies, testing/trials, environmental practices and procedures, or other matters affecting area of responsibility.
• Will be responsible for several performance KPI’s and for conducting crew meetings and planned general inspections.
• Will ensure training and implementation of Quality Airplane methodology and quality tools in the decision-making process.
• Will stablish work schedules for the melting side.

https://careers.gerdau.com 

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Manufacturing Technician - Lancaster, SC

Are you looking for a new career that offers challenges and the opportunity to learn new skills and promotions? Do you like operating heavy equipment, troubleshooting mechanical issues, and working with your hands?  Join Gerdau as we build the future!

Competitive pay $52000 - $62000 / year. Benefits start immediately.

We Have: 

• A strong global presence with mills that transform millions of metric tons of raw material to produce steel beams, flat-rolled steel, merchant bar, rebar, spikes, and wire used by the auto industry, appliance, construction, machinery, and equipment industries.    
• A culture that welcomes diversity, encourages innovation, and creates products that serve humanity.  
• An environment that values teamwork, safety, and sustainability. 
• A commitment to continuous improvement and the belief that we can create a better future for our employees and our global community by investing in people, processes, and technology. 

We Offer:

• Comprehensive Medical, Prescription, Dental, Vision Plans – Eligible upon 1st day of hire 
• Health & Dependent Care (Flexible Spending Account) 
• 100% Matching 401K up to 6% 
• Life/Accidental Life Insurance 
• Health Advocate Services 
• Employee Assistance Program 
• Tuition Reimbursement Program 
• Career Path System and Training 
• An empowering and open culture with the opportunity to grow and create 

Your Qualifications: 

• A high school diploma or GED
• Basic math skills
• One year of industrial experience
• Flexibility to work outdoors in a variety of weather conditions
• Ability to lift up to 50 lbs
• Mechanically inclined
• Ability to work from 6pm to 6am. Monday thru Friday and an occasional Saturday
• Desire to learn

Your Purpose:

You will be performing a limited variety of highly repetitive duties to load and secure steel rail spike products into railroad gondola cars, boxcars, or truck trailers for shipment to customer location. You will assist in servicing production lines and transfer finished products to temporary storage locations or dock loading platform.

Your Work:

• Operate a forklift to transfer finished products from the production line and secure with steel banding or shrink-wrap material to palletize product for shipment.
• Move palletized material to a temporary storage inspection station or loading dock.
• Disengage rail car mover lever to position boxcar or gondola into the loading position.
• Prepare a rail car or other specified vehicles to receive the product for shipment. Attach steel strapping material to boxcar interior walls in accordance with standard operating procedures and methods. Ship product palletized or loose as per customer order.
• Operate forklift, or handheld, push-button pendant crane, with or without magnet, to load specified product into the proper vehicle.
• Operate a forklift or pendant crane to unload incoming steel and machine shop supplies, pallets, empty kegs, and steel banding strips. Place supply items at the proper storage locations. Distribute pallets to the production line staging area.
• Check and verify steel heat and bundle numbers, weight, and carbon content as indicated on the shipping invoice; check off an item or indicate shortages and forward to office personnel for processing.
• Operate forklift to empty scrap buckets and return to the production line.
• As directed, assist on the production line as a relief person.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status.. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Gerdau is the leading company in the production of long steel in the Americas and one of the major suppliers of specialty long steel in the world. With more than 45,000 employees, Gerdau has an installed capacity of more than 25 million metric tons of steel, and it is the largest recycler in Latin America, and around the world, it transforms millions of metric tons of scrap into steel every year. 

Gerdau Long Steel North America is a leader in mini-mill steel production and steel recycling in North America, with an annual manufacturing capacity of approximately 10 million metric tons of mill finished steel products. Through a vertically integrated network of mini-mills, scrap recycling facilities and downstream operations, the company serves customers throughout the U.S. and Canada, offering a diverse and balanced product mix of merchant steel, rebar, structural shapes, fabricated steel, flat rolled steel and wire rod.

Job Summary:

Operates Scales to weigh incoming and outgoing vehicles for either delivery or pickup of scrap materials.

Will be dealing with customers on daily basis. Customer service and multitasking skills are highly desired.   

Nature and Scope:

Directly reporting to the Division Manager, the Scale Operator must regularly communicates with other scale operators and inspectors to assist with vehicle yard traffic. Will work with other Gerdau staff as needed via, phone, email, in-person, and radio communications.

Principal Accountabilities:

• Enthusiastic greeting of customers and direct them to various locations in the facility
• Record weights and other supporting documentation on tickets.  This includes accurate recording of load deductions (non-conforming material), re-pricing as directed by Buyers, printing and distributing scale tickets as required.
• Maintain daily records of all purchases and sales transactions
• Process scale payments including pay adjustments; contact the Buyer to discuss contracts details and any changes
• Issue cash payments for customers that require immediate payment.
• Must be able to manage difficult customer situations effectively and professionally.
• Answer main telephone line and redirect all calls accordingly.
• Constantly maintain radio contact with the appropriate yard personnel including and being aware of Emergency calls and proper handling of different types of situations.
• Maintain and implement safe work procedures while ensuring all guests have been informed of and adhere to proper PPE requirements.
• Manage the work area by keeping all paperwork processed and neatly filed as well as maintaining cleanliness and orderliness of scale house and workstations according to 5S Standards.
• Daily cash reconciliation; review ticket purchases and complete daily cash count

Skills and Abilities:

• This position must have basic MS Office computer skills and be able to communicate well with others.
• They must also have the ability accurately multitask at a fast pace positive manner.
• Must possess excellent telephone skills.
• Ability to communicate effectively when dealing with customers, carriers, and company drivers.

• High School Diploma or GED. Post-secondary education preferred.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status.

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Located at our North York Metals Recycling Yard

Day shift

Job Summary:

The laborer is an entry level position, reflecting employees with no previous knowledge or experience related to scrap metals and recycling.  The laborer must have the ability to learn and a strong work ethic.  The laborer will assist in several aspects of daily operations such as scrap inspection, sortation, and general yard maintenance as directed. 

Under the safety standards of Gerdau the laborer will learn to operate mobile equipment and perform general maintenance duties on machinery.  The laborer must have strong communication skills and use them at all times to ensure safety among co-workers, truck drivers, peddlers, and contractors. 

Primary Duties and Responsibilities:

1. Follow all of the established Gerdau safety, environmental, and routine procedures specific to the yard
2. Operate the fork-lift while progressing towards loader operation and material handler operation to assist in the loading, off-loading, and sorting of scrap materials
3. Inspect incoming scrap against quality and environmental standards with a progression towards grading and purchasing scrap material
4. Apply deductions to non-conforming materials through effective communication with the scale house or yard inspector
5. Perform and document daily Routine Equipment Care (REC)
6. Detect and report faulty tools, equipment, environmental hazards, and safety hazards to a supervisor
7. Maintain work area and equipment in a clean and orderly fashion
8. Provide excellent customer service
9. Promote and practice the core values of Gerdau

Locations with Rail:

1. For Operations that have rail; shift full and empty cars, operate locomotive, activate switches, couple and uncouple cars, and set brakes or wheel blocks as requested, in accordance with standard operating procedures. 

Additional Responsibilities:

1. Ensure non-conforming objects have been removed from incoming scrap vehicles such as gas tanks (drained and removed), propane tanks, and batteries
2. Ensure radioactive materials are removed from inbound/outbound scrap material and quarantined properly
3. General house-keeping duties: sweep shop area and removal of garbage
4. Assist in non-ferrous sorting and processing as directed by non-ferrous operator
5. Assist co-workers in general operational duties that are essential to the yard in terms of safety, efficiency, and profitability
6. Problem solving input and contributions as required

The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

Qualifications and Experience:

1. Desire to enhance skills and knowledge to develop as a Gerdau employee
2. Promote and practice the core values of Gerdau 
3. High School Education preferred but not required.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. All external applicants must be legally eligible to immediately work in the country of hire without current or future sponsorship. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

This position is open to domestic candidates only.

About Us:

G.Future: Gerdau’s Next Generation of Leaders

• To invest in our junior talent, Gerdau proudly offers G.Future, a program designed to develop future leaders for the company. As members of this leadership program, participants will be put through an intensive 18-month program that utilizes on-the-job learning, classroom training, coaching and ongoing mentorship from various leaders to shape the G.Futures into our future managerial and technical leaders.

Some of the experiences of this program include:  

• G.Futures will be responsible for solving large- and small-scale problems. Examples include: Creating Mechanical components/assembly drawing(s), proposing business methods to optimize product output and redirect process prioritization to improve current production standards.  

• Work as a leader managing the strategic implementation for overall business goals. 

 • G.Future also offers a Mentorship Program, a unique feature designed to help participants build a successful career. Your mentor will be a seasoned professional within the company who will facilitate your integration with Gerdau, help you understand Gerdau’s values and business culture and streamline your training by providing you technical knowledge and business vision.  

• Visit our customers and suppliers to gain In-depth knowledge of our business from beginning to end. • Gain a holistic view and acumen of the industry by working with each level of Gerdau North America, as well as travel to various destinations throughout the US and Canada.  

• Further your development by interacting with other G.Futures from across North America while tackling some of the organization’s biggest challenges.  

• Grow a set of managerial, interpersonal, analytical, and technical skills

Requirements:

• Bachelor’s degree in:
  • Mechanical, Electrical, Chemical, Industrial Engineering
  • Electrical Automation
  • Material Sciences/Metallurgy
  • Or other applicable degree
• Bachelor's graduate from within the past 3 years, or expected to graduate by Summer 2025
• Record of high academic achievement (Minimum GPA 2.5, preferred GPA 3.0 or above)  
• Preference for a degree related internship experience  
• A maximum of 3 years full-time work experience 
• Well-rounded applicants with leadership roles in student organizations or extra-curricular activities  
• A high learning agility and willingness to adapt and develop continuously  
• Must be legally authorized to work in the United States without requiring current or future sponsorship for employment 
• Ability to travel to various locations within the United States and Canada during the length of the program

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

PROGRAM DESCRIPTION

Gerdau is seeking college students to participate in our, G.Start program. G.Start is a paid internship program with the goal of developing students for future technical and managerial positions G.Start internships are project-focused and mutually-beneficial. G.Start is a program that values the diversity and inclusion of our business and society.

Gerdau is looking for G.Start candidates who have an eagerness to grow personally and professionally, being a part of a global company with more than 120 years of entrepreneurship and achievements in the steel industry. This program is for individuals with high learning agility and willingness to adapt and develop continuously, who aim at consistently outperforming in a variety of settings and circumstances.

Who We Are

Gerdau is a major steel manufacturing company, operating in 10 countries, and employing over 30,000 individuals.  The North American business divisions (Gerdau Long Steel North America and Gerdau Specialty Steel North America) produce long and special steel products for the agriculture, energy, industrial, automotive, and manufacturing markets. We stimulate the economy through our network of recycling operations and mills, operating ten mills in the U.S. and three in Canada. Our mills utilize efficient and clean production practices, including the use of electric arc furnace (EAF) technology. The use of this technology and its process makes our steel one of the greenest choices available. 

Opportunities to Learn

• Microsoft suite, CAPEX, AutoCAD, SolidWorks, etc.

Job Responsibilities and the Individual

An Intern with Gerdau must have an eagerness to grow personally and professionally, being a part of a global company with more than 110 years of entrepreneurship and achievements in the steel industry. This program is for individuals with high learning agility and willingness to adapt and develop continuously, who aim at consistently outperforming in a variety of settings and circumstances.

• Undergraduate entering Junior or Senior year.
• Pursing a degree in Mechanical, Electrical, Automation, Materials Science or Metallurgy Engineering or related from a recognized accredited college or university.
• Record of high academic achievement (Minimum GPA 2.5, preferred GPA 3.0 or higher).
• Well-rounded applicants with leadership roles in student organizations or extra-curricular activities.
• Must be legally authorized to work full-time in the country of hire without requiring current or future sponsorship for employment.
• Candidates much demonstrate leadership potential, strong interpersonal skills, excellent written and oral communication skills, initiative, and problem-solving skill

Start shaping the future with us!

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Empowering people who build the future.

Why Work for Us

Generations have worked at Gerdau Whitby and now it's your turn!  Gerdau is growing and the Whitby Plant is expanding with the latest tools and technology.  Are you looking for a sustainable career at plant with over 50 years of history in the Durham Region?  Are you a determined person who enjoys identifying equipment issues and finding ways to resolve them? Do you like working in a team oriented and collaborative environment?

About Gerdau

At Gerdau, it's all about the people. Our culture thrives by embracing diversity, encouraging innovation and creating products that serve humanity. We value teamwork, safety, and sustainability. We are committed to continuous improvement and believe we can create a better future for our employees and our Global community by investing in people, processes, and technology. We offer Global opportunities, competitive benefits, flexible work schedules, opportunities for career development and more. Join us in our cultural & digital transformation, and help us build the future at the Gerdau We Are Creating.

Overview

Reporting to the Maintenance General Foreman, the main focus of this position is to improve electrical equipment reliability, while optimizing maintenance costs.

The Electrical Maintenance Supervisor works with a team of Maintenance Leaders, including Planners, Reliability Engineers, and Electricians in order to meet the targets outlined above.

Techniques include the adherence to reliability practices such as preventive/predictive inspections, spare parts management, and optimized planning, scheduling and execution routines.

Responsibilities

• Manage and prioritize Electrical Maintenance Work Order backlog in CMMS (SAP)

• Establish work procedures for corrective and preventive/predictive maintenance repairs

• Identify critical equipment spares, materials, and component needs

• Support the preparation of work packages for maintenance activities during production interruptions and outages

• Collaborate with Maintenance, Operations, and Engineering for equipment repairs and improvements

• Support in the preparation of electrical designs in accordance with established codes and standards

• Supervise maintenance trades and contractors during production down periods and outages for equipment repair and onsite activities

• Identify and solve chronic electrical failures

Qualifications

• Electrical Technologist OR Bachelor's degree in Electrical Engineering OR Certified Electrician

• Knowledge of electrical building services, power distribution systems, and electrical power components

• Strong communication skills (verbal and written)

• Strong time management skills and ability to adjust to shifting priorities

• Ability to collaborate with internal and external stakeholders

• Ability to lead a team of electricians

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. All external applicants must be legally eligible to immediately work in the country of hire without current or future sponsorship.  

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Empowering people who build the future.

WHAT THE POSITION ENTAILS:

Reporting to the Maintenance Supervisor, this position’s job responsibilities include:

• Troubleshoot AC/DC motors, controls, PLC, electrical drives, low/medium/high voltage systems.
• Service the electrical aspect of pumps, motors, cranes, and hydraulic/pneumatic systems.
• Receive instructions, prints or work orders, covering scheduled and emergency repairs, installation, and inspection work to be done.
• Maintain specified records of work performed, details of repairs, and materials usage on computerized maintenance management software (CMMS), work orders, logbooks, and checklists.
• Perform rounds and checks machinery condition using checklists or digital tools to identify abnormalities and ensure that machine functions are operating within the normal specifications.
• Operate material handling equipment such as cranes, tow motor operation including rigging.
• Demonstrate basic computer skills.

EDUCATION/EXPERIENCE:

• Certificate of Qualification (Industrial Electrician - 442A or Construction Electrician - 309A) as recognized by Skilled Trades Ontario is required.

WHAT GERDAU OFFERS YOU:

• Hourly Rate: $44.45/hr. (with 2% rate improvement in 2025 & 2026)
• Overtime: weekly overtime opportunities.
• Shift Premiums: an average of $575/year in shift premiums.
• Cost of Living: Annual cost of living increases based on Consumer Price Index (CPI).
• Vacation Bonus: 50% bonus when vacation is taken outside of prime vacation periods.
• Holidays: Paid Statutory Holidays
• Annual Tool Allowance: $150/year
• Safety Boot Allowance: 100% company provided.
• Uniforms: 100% company provided.
• Pension: up to 6% contribution from Company with no mandatory employee contributions.
• Medical Benefits: 100% company sponsored.
• Full Dental and Orthodontia Benefits: 100% company sponsored.
• Employee Assistance Program: 100% company sponsored.

ADDITIONAL INFORMATION:

• Background, education, and criminal record checks will be performed.
• All successful candidates must pass a post-offer medical and ergonomic assessment.
• Must be able to work rotating shifts.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. All external applicants must be legally eligible to immediately work in the country of hire without current or future sponsorship.  

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Empowering people who build the future.

WHAT THE POSITION ENTAILS:

Reporting to the Maintenance Supervisor, this position’s job responsibilities include:

• Inspect, install, repair, replace, adjust mechanical equipment in the plant.

• Service the mechanical aspects of pumps, motors, cranes, and hydraulic/pneumatic systems.

• Receive instructions, prints, and work orders, covering scheduled and emergency repairs, installation, and inspection work.

• Determine the best way of making repairs to minimize interruption of production.

• Advise when immediate shutdown of equipment is necessary to minimize damage or when temporarily continued operation will have no harmful effect.

• Maintain specified records of work performed, details of repairs, and materials usage on computerized maintenance management software (CMMS), work orders, logbooks, and checklists.

• Perform rounds and checks machinery condition using checklists or digital tools to identify abnormalities and ensure that machine functions are operating within the normal specifications.

• Responsible for performing assigned maintenance work on large and small producing units.

• Operate power driven mobile equipment and ordinary crane hooking.

EDUCATION/EXPERIENCE:

• Certificate of Qualification (Industrial Mechanic/Millwright – 433A) as recognized by Skilled Trades Ontario is required.

• Experience in a heavy manufacturing environment is preferred.

• Demonstrated mechanical aptitude, with exposure to Bearings, Pneumatics, Hydraulics, Lubrication, Rotating Equipment.

• Strong communication and work ethic, ability to work in a team and with other trades.

• Basic computer experience.

WHAT GERDAU OFFERS YOU:

• Hourly Rate: $44.45/hr. (2% rate improvement in 2025 & 2026)

• Overtime: weekly overtime opportunities.

• Shift Premiums: an average of $575/year in shift premiums.

• Cost of Living: Annual cost of living increases based on Consumer Price Index (CPI).

• Vacation Bonus: 50% bonus when vacation is taken outside of prime vacation periods.

• Holidays: Paid Statutory Holidays.

• Annual Tool Allowance: $150/year.

• Safety Boot Allowance: 100% company provided.

• Uniforms: 100% company provided.

• Pension: up to 6% contribution from Company with no mandatory employee contributions.

• Medical Benefits: 100% company sponsored.

• Full Dental and Orthodontia Benefits: 100% company sponsored.

• Employee Assistance Program: 100% company sponsored.

ADDITIONAL INFORMATION:

• Background, education, and criminal record checks will be performed.

• All successful candidates must pass a post-offer medical and ergonomic assessment.

• Must be able to work rotating shifts.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. All external applicants must be legally eligible to immediately work in the country of hire without current or future sponsorship.  

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Empowering people who build the future.

Gerdau impacts the lives of thousands of people around the world. The steel we produce is in cars and trucks that drive the economy, bridges that shorten distances, stadiums, and parks where we make memories, medical equipment that revives our health, and countless other products which are part of our everyday paths that lead to a realized future. Our culture thrives by embracing diversity, encouraging innovation, and creating products that serve humanity. We value teamwork, safety, and sustainability. We are committed to continuous improvement and believe we can create a better future for our employees and our global community by investing in people, processes, and technology. We offer global opportunities, competitive benefits, flexible work schedules, opportunities for career development and more. Join us in our cultural and digital transformation and help us build the future.

Gerdau’s North American business divisions manufacture long and special steel products for the agriculture, energy, industrial, automotive, and manufacturing markets. We stimulate the economy through our network of recycling operations and mills, operating ten mills in the U.S. and three in Canada. Our mills utilize efficient and clean production practices, including the use of electric arc furnace (EAF) technology. This makes our steel one of the greenest choices available.

Position Overview

An Intern with Gerdau must have an eagerness to grow personally and professionally, being a part of a global company with more than 120 years of entrepreneurship and achievements in the steel industry. This program is for individuals with high learning agility and willingness to adapt and develop continuously, who aim at consistently outperforming in a variety of settings and circumstances. During the program you will interact with team members from around the world. You will have the opportunity to learn on the job and work on ambitious projects that will further your development.

The Business Intern will be given the opportunity to learn and experience firsthand all aspects of training and development for a global company. You will work collaboratively with the entire team to help develop our employees.

Requirements

•    Have completed at least two years of a college degree from a recognized accredited college or university in a Business-related discipline (Finance, Accounting, and other related disciplines).

Gerdau believes in equal employment opportunity related to all employees and applicants for employment.  It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment based on race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status.  All applicants must be legally eligible to immediately work in the country of hire without current or future sponsorship.

If you are vision-impaired or have some other disability under the Americans with Disabilities Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866) 788-2798 or recruiting@gerdau.com.

About Us:

G.Future: Gerdau’s Next Generation of Leaders

• To invest in our junior talent, Gerdau proudly offers G.Future, a program designed to develop future leaders for the company. As members of this leadership program, participants will be put through an intensive 18-month program that utilizes on-the-job learning, classroom training, coaching and ongoing mentorship from various leaders to shape the G.Futures into our future managerial and technical leaders.

Some of the experiences of this program include:  

• G.Futures will be responsible for solving large- and small-scale problems. Examples include: Creating Mechanical components/assembly drawing(s), proposing business methods to optimize product output and redirect process prioritization to improve current production standards.  

• Work as a leader managing the strategic implementation for overall business goals. 

 • G.Future also offers a Mentorship Program, a unique feature designed to help participants build a successful career. Your mentor will be a seasoned professional within the company who will facilitate your integration with Gerdau, help you understand Gerdau’s values and business culture and streamline your training by providing you technical knowledge and business vision.  

• Visit our customers and suppliers to gain In-depth knowledge of our business from beginning to end.

• Gain a holistic view and acumen of the industry by working with each level of Gerdau North America, as well as travel to various destinations throughout the US and Canada.  

• Further your development by interacting with other G.Futures from across North America while tackling some of the organization’s biggest challenges.  

• Grow a set of managerial, interpersonal, analytical, and technical skills

Requirements:

• Bachelor’s degree in:
  • Mechanical, Electrical, Industrial Engineering
  • Material Sciences/Metallurgy
  • Or other applicable degree
• Bachelor's graduate from within the past 3 years, or expected to graduate by Summer 2025, December 2024
• Record of high academic achievement (Minimum GPA 2.5, preferred GPA 3.0 or above)  
• Preference for a degree related internship experience  
• A maximum of 3 years full-time work experience 
• Well-rounded applicants with leadership roles in student organizations or extra-curricular activities  
• A high learning agility and willingness to adapt and develop continuously  
• Must be legally authorized to work in the United States without requiring current or future sponsorship for employment 
• Ability to travel to various locations within the United States and Canada during the length of the program

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

$63000 - $68000 / year which includes $19.72 an hour and after 90 days increases to $21.32, biweekly production bonus, shift premiums, and 354 annual hours of built in overtime.

We Have: 

• A strong global presence with mini mills that transform millions of metric tons of raw material to produce steel beams as well as other products.
• A culture that welcomes diversity, encourages innovation, and creates products that serve humanity.  
• An environment that values teamwork, safety, and sustainability. 
• A commitment to continuous improvement and the belief that we can create a better future for our employees and our global community by investing in people, processes, and technology. 

We Offer:

• Comprehensive Medical, Prescription, Dental, Vision Plans – Eligible upon 1st day of hire 
• Health & Dependent Care (Flexible Spending Account) 
• 100% Matching 401K up to 6% 
• Life/Accidental Life Insurance 
• Biweekly Bonus 
• Parental Leave
• Tuition Reimbursement Program 
• Career Path System and Training 

Your Qualifications: 

• Successful completion of entrance exam.
• Mobile equipment or heavy equipment operation experience. 
• Flexibility to work a 12-hour rotating schedule with days, nights, and two consecutive weekends a month.
• Willingness to learn and be self-motivated.

Your Work:

• Operation of mobile equipment, handling materials safely, and loading appropriate products in designated areas.
• Complete Gerdau safety training, forklift certification training and electric overhead crane training.
• Transfer stacked and bundled materials from end of rolling mill finishing operations to stock area:
  • Store materials according to the product, grade, size, and heat number.
  • Rotate warehouse stock materials to make room for new product.
  • Communicate material locations for inventory accuracy.
• Observe items for conformity regarding product size, type, and length. Looks for visible quality issues and reports issues to the Quality department.
• Assist in physical inventory counts and daily inventory spot checks.
• Ensure daily preventative maintenance is performed on vehicles and mobile equipment, which may include fueling, cleaning, and checking/adding fluids as needed.
• Assist in the training of coworkers as needed.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status.

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

BASIC FUNCTION (Primary Purpose):

The Security Guard EMT ensures the safety of all people and property at the location by monitoring traffic into and out of the location, and by performing other related responsibilities that contribute to the location’s safety.  In the event of emergencies, this role responds to and provides appropriate treatment and transportation assistance to ensure the safety of sick or injured people at the location.

Primary Duties & Responsibilities:

Scope (brief description)

To control the access of all personnel, including employees, visitors, contractors and truck drivers, to the mill and provide other duties related to the protection of people and property of Gerdau.  To provide appropriate emergency care and transportation assistance to all sick or injured people at the location.

Supervisory Responsibilities & Reporting Structure

• Supervises who (level and number):  None
• Reports to:  Safety Manager

Qualifications and Educational requirement(s):

High School Diploma or equivalent

EVOV and precepted EMT-B certification or higher.

Ability to climb stairs/ladders, balancing, bending, kneeling, sitting and standing/walking for long periods of time.

Able to lift up to 50 lbs.

Must have valid driver’s license.

Able to work rotating 12-hour shifts.

Metrics for success:

1. Metric 1:  All people on company property are accounted for at all times.
2. Metric 2:  A ready supply of fire extinguishers is always maintained.
3. Metric 3:  All sick or injured people on company property receive the appropriate emergency care.

BASIC FUNCTION (Primary Purpose):

This jobs primary function is to build relationships with customers and help support the sale of Gerdau product(s) to our customers (i.e., revenue generation)

Primary Duties & Responsibilities:

Scope (brief description)

This position will be responsible for sales and volume within a specific territory and for a specific product line(s).  This position will have established sales goals/quotas (volume, forecast accuracy) to attain within his/her territory.  The approximate size/volume of territory is greater than 10,000 tons per month. The mix of customers and tons can vary greatly from territory to territory and product to product.

Qualifications and Educational requirement(s):

Five or more years of sales experience and a Two or four year degree from an accredited college or university

Preferred experience in the following industries (not required): 1. Steel, 2. Metals Manufacturing, 3. Commodities pertaining to the steel industry, 4. Metals Distribution/Service Centers, 5. General Manufacturing (industrial, car).

Preferred degree in the following areas (not required):  1. Business with Sales and Marketing emphasis, 2. Engineering or Material sciences

>50%  travel is required

Metrics for success:

1. Forecast Accuracy for price and volume.
2. Achieving volume/tons and price goals (revenue) – Yearly PEX Goals
3. Developing strong relationships with customers while balancing Gerdau’s needs
4. Successfully managing the customer’s order book from quoting to shipments. (Customer complaints, credits issued, errors, aged shipments, etc.)

We Have:

• A strong global presence with mini-mills that transform millions of metric tons of raw material to produce steel beams, flat-rolled steel, merchant bar, rebar, spikes, and wire used by the automotive industry, appliance, construction, machinery, and equipment industries.    
• A culture that welcomes diversity, encourages innovation, and creates products that serve humanity.  
• An environment that values teamwork, safety, and sustainability. 
• A commitment to continuous improvement and the belief that we can create a better future for our employees and our global community by investing in people, processes, and technology. 

We Offer:

• Competitive compensation with annual STI Bonus. 
• Comprehensive Medical, Prescription, Dental, Vision Plans – Eligible upon 1st day of hire 
• Health & Dependent Care (Flexible Spending Account) 
• 100% Matching 401K up to 6% 
• Paid Parental Leave
• Life/Accidental Life Insurance 
• Health Advocate Services 
• Employee Assistance Program 
• Tuition Reimbursement Program 
• Career Path System and Training 

Your Qualifications:

• Bachelor’s degree in business administration or a related area of study.
• Minimum of 10 years of related purchasing experience managing a wide variety of major purchasing projects/initiatives. Experience with supplier management, value analysis, and contemporary Procurement processes, combined with negotiation terms and conditions, inventory control procedures, pricing methods if applicable. A general understanding of accounting practices and related manufacturing costs/supply sources required.
• Over 8 years of Direct Materials Procurement experience in the Steel Industry with good knowledge of the different category areas and critical materials required for the steel making process. 
• Self-directed; capable of developing and executing departmental strategies while performing tactical procurement activities.

Abilities and Skills:

• Ability to lead teams and influence change.
• Strong verbal and written communication skills.
• Project planning knowledge and experience.
• Working knowledge of SAP and Microsoft Office suite software.
• Strong technical aptitude and ability to assess trends and statistical data/reports.
• Strong analytical skills.
• Ability to develop high performance teams.
• Proven coach and trainer of the procurement process.

Your Purpose:

This position is responsible for providing the leadership, guidance, and technical expertise to the procurement team and internal stakeholders such as Operations, Maintenance, Purchasing Managers and Purchasing Buyers to ensure that material and service requirements are met while minimizing total short and long-term costs for their area of responsibility.

You will be tasked with incorporating sustainability principles in its sourcing parameters and in the management of suppliers to promote responsible sourcing practices. As part of this effort, when acquiring products and services, the incumbent should work to ensure the adherence of its suppliers and contractors to Gerdau’s Sustainability Policy and Code of Ethics for Third Parties. Gerdau seeks to disseminate the culture of sustainability throughout its value chain through partnership, communication, awareness, and engagement initiatives.

Your Work:

• You will ensure the development and execution of Procurement strategies for their respective area(s) that are aligned with the business needs.  You will also interact with your corporate peers from their region and other countries to manage the Procurement process.  You will also engage regional Procurement Managers and Buyers to ensure that the best possible quality and price at a regional and local level. 
• You will be responsible for not only technical expertise in Procurement, but also for supporting and providing leadership to your respective team and stakeholders across Gerdau locations.
• You will provide direction to the Purchasing team, guide them, educate them, and ensure that Corporate and Global Procurement processes are implemented and sustained for their respective area(s).
• You will assist with developing and creating new Procurement policies for the organization and will be responsible for policy implementation, education, and adherence.  Also, utilize technology to improve the efficiency of the team and place emphasis on more value-added activities.
• You will be responsible for developing a high performing team of Category Managers who can effectively manage strategic categories and negotiate the best overall value for Gerdau while consistently engaging our internal stakeholders.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 
 
If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Are you looking for an exciting opportunity to work on a variety of new projects and analyzing trends in a manufacturing environment? Are you curious, imaginative, and like to plan in advance? Join Gerdau and experience an empowering and open culture with a real opportunity to grow and create your future. 

Earning potential of $85000 - $145000 / year depending on technical experience plus an annual bonus. Relocation assistance within U.S. may be offered.

We Have: 

• A strong global presence with mills that transform millions of metric tons of raw material to produce steel beams, flat-rolled steel, merchant bar, rebar, spikes, and wire used by the auto industry, appliance, construction, machinery, and equipment industries.    
• A culture that welcomes diversity, encourages innovation, and creates products that serve humanity.  
• An environment that values teamwork, safety, and sustainability. 
• A commitment to continuous improvement and the belief that we can create a better future for our employees and our global community by investing in people, processes, and technology.
•  A Career Path System and Training.

We Offer:

• Comprehensive Medical, Prescription, Dental, Vision Plans – Eligible upon 1st day of hire 
• Health & Dependent Care (Flexible Spending Account) 
• 100% Matching 401K up to 6% 
• Life/Accidental Life Insurance 
• Short Term & Long-Term Disability Insurance
• Annual Bonus 
• Health Advocate Services 
• Parental Leave
• Employee Assistance Program 
• Tuition Reimbursement Program 
• Career Path System and Training 

Qualifications:

• Bachelor's degree in Mechatronics or Electrical Engineering with 3-5 years manufacturing experience OR in lieu of education, 10 years work manufacturing experience programming PLC's.
• Strong knowledge of AC/DC controls and motors and drives.
• Ability to oversee electrical products, equipment, systems, etc. including elements of design, implementation, maintenance, and operational and safety standards.
• Prior experience with programming PLCs and developing ladder logic on Rockwell and Siemens S7-1516. 
• Solid understanding of PLC communication protocols (Profibus and Profinet preferred).
• Ability to troubleshoot equipment problems resulting from automation, communication, or HMI issues and implement strong corrective measures.
• Must be comfortable using MS Office, data acquisition software (IBA/PDA preferred).
• Must be willing to work in both an office setting and hands on in the field.

Your Purpose:

You will be responsible for rolling mill automation, training, troubleshooting major failures, software back-up, research, development, improvement and testing of electrical/electronic components, equipment, and systems. The position works closely with production and maintenance personnel, as well as management to ensure continuous operation and continuous improvement of equipment, and processes.  The position reports to the Maintenance General Foreman.

Your Work:

• Modify PLCs to help support the operations process, with PLC experience on one or more of the following:
  • GE innovation series controllers
  • Toshiba NV controllers
  • RX3i controllers
  • GE Genius Block I/O networks
  • Siemens S7/TIA
  • Allen Bradley PLC
• Modify HMI to help support the operations process, with HMI programming experience on one or more of the following:
  • GE Cimplicity
  • Ignition
  • WIN CC
  • Rockwell Automation
• Electrical and network experience on one or more of the following:
  • IBA Analytical tools
  • Computer networking
  • Cisco switching/router configuration
  • ABB LV and MV drives

Keywords: BSEE, Electrical Engineer, Automation Engineer, Controls Engineer, Process Engineer, automation, programming, control systems, PLC, HMI, SCADA, hydraulics, pneumatics, AC/CD, drives, motors, steel, metals, manufacturing

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status.

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

ABOUT GERDAU:

Gerdau is embarking on a multi-year cultural & digital transformation. At Gerdau, we value teamwork, safety, and sustainability. We are committed to continuous improvement and believe we can create a better future for our employees and our Global community by investing in people, processes, and technology. We offer Global opportunities, competitive benefits, flexible work schedules, opportunities for career development and more. Help us build the future at the Gerdau We Are Creating.

DESCRIPTION:

Responsible for high volume transaction processing and responding to vendor and internal inquiries with a customer service focus. Processing includes the entry of Accounts Payable transactions including 3-way match, the intake and sorting of incoming correspondence from vendors (mail, e-mail, fax), as well as identifying exceptions to the standard processes according to the Procure to Pay policies.  Reports to Mill Accountant with overall process guidance available from Procure to Pay resources.

PRINCIPAL ACCOUNTABILITIES:

• Receive, review and prepare multi-currency invoices according to standard procedures for entry into AP module for payment.
• Accurate and timely Accounts Payable entries into an integrated ERP system to realize all eligible cash discounts where appropriate and meet A/P’s processing Service Level Agreements (SLA’s) and Key Performance indicators (KPI’s)
• Ensure proper tax codes are applied to vendor invoices per policy.
• Properly identify, log and forward exceptions for error resolution utilizing the systems in place
• Communicate with vendors and internal personnel in a timely and professional manner to resolve issues.
• Assure compliance with all company and legal/regulatory requirements (SOX, internal/external audit, and IRS)
• Run and maintain standard reports associated with accounts payable activities.
• Review and communicate about root causes of exceptions to buyers where possible.
• Other projects as assigned by management.

REQUIREMENTS:

• High School diploma or equivalent
• Minimum 1 year of accounts payable or related field experience accompanied with a high school diploma, or no relevant experience with a business-related degree.
• Software Experience:
  • MS Office products, especially Excel.
  • Ariba / SAP preferred.
• Problem solving capabilities.
• High volume processing experience.
• Strong organizational skills; attention to detail; dependable and flexible.

• Able to work effectively in a team environment, as well with customers and external parties.
• Ability to work in a fast paced, changing environment.

BASIC FUNCTION:

DIMENSIONS:

NATURE AND SCOPE:

Qualifications for this position include a four-year college degree in Engineering or Material Science, combined with up to 2 years of industrial experience. The candidate must demonstrate knowledge of asset reliability technology and systems, with a working knowledge of heavy manufacturing. The incumbent should also possess a basic knowledge of engineering concepts, and techniques. The successful applicant must solve problems, demonstrate project management skills, and have a passion to lead change.
The Reliability Engineer I reports to the Reliability Engineer IV or Reliability Engineer V. The incumbent will be responsible for maintaining the maintenance manuals, standard maintenance operating procedures, CMMS, equipment reliability databases, and other maintenance related software systems. The incumbent will organize and conduct training programs for the maintenance personnel regarding equipment testing and operation, new software, methodologies, and procedures. This position requires the ability to effectively communicate with associates at all levels within the organization.
The Reliability Engineer I will participate in routine safety and ARP activities including inspections, audits, visibility tours, and interact with employees and contractors. This job is responsible for analyzing equipment repair history, costs, and repetitive repairs to develop and implement proactive repair planning. The incumbent will conduct non-intrusive inspections. The use of Predictive Maintenance (PdM) techniques or other ARP tools to maximize equipment life and performance is required. This position is responsible for maintaining and updating documentation, such as equipment descriptions, job plans, spare parts, equipment lists, histories, manuals, flow charts, drawings, and specifications. The incumbent must manage the interests of all parties in creating and modifying work procedures and equipment, and will be responsible for staying abreast of current technology to recommend changes to effect continual asset reliability improvement. This position will also coach and mentor operations and maintenance personnel and contractors on ARP procedures. The incumbent will participate on special projects or conduct other duties as assigned.
The incumbent must perform the above mentioned duties and responsibilities in accordance with all Federal, State, Provincial, and Local environmental regulations, as well as company policies and procedures. Employees must also report any situation that may have a detrimental impact to human health or the environment to their immediate supervisor.

PRINCIPAL ACCOUNTABILITIES:

5. Collaborate with operations, maintenance, engineering, and reliability personnel to ensure the reliability of equipment on all existing and new assets.
6. Participate in technical studies on equipment and develop corrective action plans to maximize availability and reliability.
7. Facilitate training sessions and assist in identification of skill development needs for plant personnel and contractors to support ARP, maintenance, and safety.
8. Identify critical equipment spares, material, component needs, and coordinate with maintenance, procurement, and stores to identify re-order processes/quantities to minimize downtime by using Reliability Centered Maintenance methodologies.
9. Participate in Failure Analysis on maintenance issues.
10. Assist with Annual Action Planning process

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Empowering people who build the future.

Job Summary:

The Yard Operator has a variety of duties and a broad skill set that makes this position an important part of operational needs. The Yard Operator requires knowledge of scrap grading, or have the ability to learn. The Yard Operator will assist in several aspects of daily operational needs such as scrap inspection, ferrous and non-ferrous purchasing, mobile equipment operation, and performing general maintenance duties.

The Yard Operator will be expected to safely operate a material handling crane or loader in order to accomplish daily tasks. They must communicate regularly with the scale, supervisor, other coworkers, and customers about the quality of material and shipping requirements.

Primary Duties and Responsibilities:

1.    Follow all established Gerdau Safety, Environmental, and Routine procedures specific to the yard. 
2.    Work involves a variety of tasks, simple through moderately complex in nature, requiring some care to ensure correct procedures are being followed.
3.    Ensure that all incoming scrap is scanned for radiation and that all material that fails the scan is quarantined and the appropriate personnel are notified.
4.    Operate the loader and/or the material handler to assist in loading and unloading scrap material, while following the quality standards of Gerdau and the customer.
5.    Ensure that all incoming scrap inspected against quality, and environmental standards and appropriate deductions and downgrades are applied. Communicate findings with the scale in a timely manner.  
6.    Inspect and verify scrap for grade and quality. Identify deductions and downgrades.
7.    Ensure that all outbound materials meets safety and quality standards.    
8.    Perform and document daily Routine Equipment Care (REC).
9.    Detect and report faulty material, environmental hazards, safety, and/or improper operation of plant equipment or machinery; refer questionable and unusual matters to proper supervision.  Maintain work area and equipment in a clear and orderly fashion.  
10.    Provide excellent customer service.
11.    Promote and practice the core values of Gerdau.
12.    Participation in daily safety routine.

Locations with Rail: 

1.    For Operations that have rail; shift full and empty cars, operate locomotive, activate switches, couple and uncouple cars, and set brakes or wheel blocks as requested, in accordance with standard operating procedures.  

Additional Responsibilities:

1.    Assist in monthly inventory counts (where applicable)
2.    Assist maintenance personnel in the performance of equipment repairs as required or directed.
3.    Operate the Baler Operation.
4.    Assist in nonferrous processing; including segregation of materials to upgrade products.  For example: Copper, Brass, Aluminum, etc.
5.    Assist co-workers in daily operational duties that are essential to the yard in terms of safety, efficiency, and profitability.
6.    Stage and remove material for torching with a material handler (where applicable).
7.    Problem solving input and contributions as required.

The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

Qualifications and Experience:

1.    Desire to enhance skills and knowledge to develop as a Gerdau employee 
2.    Promote and practice the core values of Gerdau  
3.    High School Education at a minimum.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. All external applicants must be legally eligible to immediately work in the country of hire without current or future sponsorship.  

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Empowering people who build the future.

We Offer:
Starting Salary $64000 / year (includes base hourly rate plus scheduled overtime, biweekly production bonus and shift premiums). 
Career Path System and Training
Advancement Opportunities
Tuition Reimbursement
Flexible Shifts
Benefits on Day One – Comprehensive Medical, Dental, & Vision Plans
100% Matching 401K up to 6%
Paid Short- and Long-Term Disability Plan
Paid Life/Accident Insurance
Paid Holidays
Paid Time Off

We Have: 
A strong global presence with mini-mills that transform millions of metric tons of raw material to produce steel beams, flat-rolled steel, merchant bar, rebar, spikes, and wire used by the auto industry, appliance, construction, machinery, and equipment industries.    
A culture that welcomes diversity, encourages innovation, and creates products that serve humanity.  
An environment that values teamwork, safety, and sustainability. 
A commitment to continuous improvement and the belief that we can create a better future for our employees and our global community by investing in people, processes, and technology. 

 We Offer:
Comprehensive Medical, Prescription, Dental, Vision Plans – Eligible upon 1st day of hire 
Health & Dependent Care (Flexible Spending Account) 
100% Matching 401K up to 6% 
Life/Accidental Life Insurance 
Health Advocate Services 
Employee Assistance Program 
Tuition Reimbursement Program 
Career Path System and Training 
An empowering and open culture with the opportunity to grow and create 
 
You Have: 
The desire to learn new roles and grow with the company
Ability to read, write, and follow instructions
Ability to use simple specifications, dials, and gauges to regulate electricity and water flow.
High School Diploma or GED
1 year of industrial or manufacturing experience to include operating heavy mobile equipment 
Flexibility to work a rotating 12 hr shift, days, nights and weekends 
 Ability to climb stairs, climb ladders, reach, squat, tolerate prolonged sitting, standing or walking, balance, bend, operate mobile equipment, crawl, kneel, lift up to 75 lbs.
Ability to work in cramped quarters, heights, extreme temperature conditions.
 
Your Purpose:
Primarily responsible for maintaining and stocking consumables for the Furnace or Casters, general housekeeping duties (includes 5S and cleaning), assisting other furnace operators as needed and may be responsible for collecting and running slag samples. 

Your Work:
Unload trucks and stock supplies and/or consumables.
Operate/stock temperature and sampling device used to take temperatures, oxygen readings and steel samples.
May also take care of slag pots/pits as needed (i.e clean out pits with shovels, water, et).
Assist in maintaining refractory (patching or gunning).
Maintain runner/tap hole.
Build and add electrodes.
Record data in production systems.
Communicate with team members.

#thegerdauwearecreating

Empowering people who build the future.

About Us

Gerdau Long Steel North America is a leader in mini-mill steel production and steel recycling in North America, with an annual manufacturing capacity of approximately 10 million metric tons of mill finished steel products. Through a vertically integrated network of mini-mills, scrap recycling facilities and downstream operations, the company serves customers throughout the U.S. and Canada, offering a diverse and balanced product mix of merchant steel, rebar, structural shapes, fabricated steel, flat rolled steel and wire rod.  Gerdau is the largest recycler in the World. Each year, we transform millions of tons of scrap into steel that is used to build the future.

Why you'll love it here!

At Gerdau it’s all about the people. Gerdau's growth is based on our purpose and on a vision focused on excellence. The measures of performance are customer satisfaction, the personal and professional growth of each employee, our communities, and the World.  Our culture thrives by embracing diversity, encouraging innovation and creating products that serve humanity.

This is your purpose:

This position monitors and assists in controlling incoming and outgoing vehicles, shipments and containers through use scale and software systems.  All activity must be accounted for and accurately documented on scale tickets, bills of lading, purchase orders and packing slips, etc.

Directly reporting to the Division Manager, the Scale Operator must regularly communicate with dispatch personnel and other scale operators to assist with company vehicle traffic and all incoming and outgoing yard traffic. This position interacts frequently with yard operations including but not limited to emergency contact for yard operations, material receiving personnel, internal and external drivers as well as management, sales and I.T. personnel.

What you will do:

• Enthusiastic greeting of customers and ascertain material grade including all necessary paperwork needed to safely direct all incoming loads to the proper locations throughout the facility.
• Ensure accurate documentation of all inbound and outbound scale transactions by weighing of all customers vehicles, carriers, and company vehicles on main scale. Record supplier, truck or car identification, description and grade of material, gross, tare and net weights, and discharge location of the load. This includes accurate recording of load deductions (non-conforming material), re-pricing as directed by Buyers, printing and distributing scale tickets as required.
• Maintain daily records of all purchases and sales transactions including proper assignment of purchase and sales order numbers to inbound and outbound material.
• Process scale payments including processing payment adjustments; contact the Buyer to adjust or add in contracts; remove temporary pricing, address and mail out payments as per customer request, fax scale tickets to customers as per their request.
• Create issue and submit cheques to the proper signing authority with proper back up documentation and distribute as requested.
• Issue cash payments for customers that require immediate payment.
• Must be able to manage difficult customer situations effectively and professionally.
• Answer main telephone line and redirect all calls accordingly.
• Constantly maintain radio contact with the appropriate yard personnel including and being aware of Emergency calls and proper handling of different types of situations.
• Maintain and implement safe work procedures while ensuring all guests have been informed of and adhere to proper PPE requirements.
• Consistently monitor and lifting of main yard arm.
• Manage the work area by keeping all paperwork processed and neatly filed as well as maintaining cleanliness and orderliness of scale house and work stations according to 5S Standards. 
• Review, file and fax all scale tickets daily and as required prior to end of shift Afternoon Shift.
• Accurately weigh in Public Scale tickets with understanding of receiving cash or billing to the appropriate customer.
• Daily cash reconciliation

What you have:

• This position must have basic MS Office computer skills and be able to communicate well with others.
• They must also have the ability accurately multi task at a fast pace positive manner. 
• Must possess excellent telephone skills.
• Ability to communicate effectively when dealing with customers, carriers and company drivers.
• Must have the ability to recognize various materials and develop viable distribution plan for customers on the scale.
• Highschool Diploma required
• 1 to 2 years related experience is an asset

What Gerdau offers you:

• Medical and Prescription
• Dental
• Vision
• Health & Dependent Care (Flexible Spending Account)
• 401K
• Basic Life/Accidental Life Insurance
• Health Advocate Services
• Employee Assistance Program
• Tuition Reimbursement Program

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. All external applicants must be legally eligible to immediately work in the country of hire without current or future sponsorship.  

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Empowering people who build the future. This position is open for domestic candidates only.

Competitive pay starting at $21.32/ hour plus comprehensive benefits!!

Full-time Permanent!

This position is open for domestic candidates only. 

Job Summary:

The Yard Operator has a variety of duties and a broad skill set that makes this position an important part of operational needs. The Yard Operator requires knowledge of scrap grading, or have the ability to learn. The Yard Operator will assist in several aspects of daily operational needs such as scrap inspection, ferrous and non-ferrous purchasing, mobile equipment operation, and performing general maintenance duties.

The Yard Operator will be expected to safely operate a material handling crane or loader in order to accomplish daily tasks. They must communicate regularly with the scale, supervisor, other coworkers, and customers about the quality of material and shipping requirements.

Primary Duties and Responsibilities:

1. Follow all established Gerdau Safety, Environmental, and Routine procedures specific to the yard.
2. Work involves a variety of tasks, simple through moderately complex in nature, requiring some care to ensure correct procedures are being followed.
3. Ensure that all incoming scrap is scanned for radiation and that all material that fails the scan is quarantined and the appropriate personnel are notified.
4. Operate the loader and/or the material handler to assist in loading and unloading scrap material, while following the quality standards of Gerdau and the customer.
5. Ensure that all incoming scrap inspected against quality, and environmental standards and appropriate deductions and downgrades are applied. Communicate findings with the scale in a timely manner.  
6. Inspect and verify scrap for grade and quality. Identify deductions and downgrades.
7. Ensure that all outbound materials meets safety and quality standards.    
8. Perform and document daily Routine Equipment Care (REC).
9. Detect and report faulty material, environmental hazards, safety, and/or improper operation of plant equipment or machinery; refer questionable and unusual matters to proper supervision.  Maintain work area and equipment in a clear and orderly fashion. 
10. Provide excellent customer service.
11. Promote and practice the core values of Gerdau.
12. Participation in daily safety routine.

Locations with Rail:

1. For Operations that have rail; shift full and empty cars, operate locomotive, activate switches, couple and uncouple cars, and set brakes or wheel blocks as requested, in accordance with standard operating procedures.  

Additional Responsibilities:

1. Assist in monthly inventory counts (where applicable)
2. Assist maintenance personnel in the performance of equipment repairs as required or directed.
3. Operate the Baler Operation.
4. Assist in nonferrous processing; including segregation of materials to upgrade products.  For example: Copper, Brass, Aluminum, etc.
5. Assist co-workers in daily operational duties that are essential to the yard in terms of safety, efficiency, and profitability.
6. Stage and remove material for torching with a material handler (where applicable).
7. Problem solving input and contributions as required.

The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

Qualifications and Experience:

1. Desire to enhance skills and knowledge to develop as a Gerdau employee
2. Promote and practice the core values of Gerdau 
3. High School Education at a minimum.

“Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. All external applicants must be legally eligible to immediately work in the country of hire without current or future sponsorship. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at  or recruiting@gerdau.com”

Empowering people who build the future.

PRINCIPAL ACCOUNTABILITIES:

1. Responsible for assisting with negotiating proposals, establishing and verifying shipping procedures. 

2. Responsible for assisting with the negotiation of confidential contracts, rates and services, with rail at the most effective cost. 

3. Incumbent also independently analyzes new rate proposals, economic conditions, increases, and rate changes as needed to determine carrier competitiveness.

4. On a daily basis, incumbent works with outside transportation service providers, Gerdau Ameristeel departments and locations, regional transportation managers, and mill shipping supervisors to obtain and provide information to meet logistics needs. 

5. Responsible for reviewing and evaluating, and processing customer, carrier, and company transportation issues.

6. The incumbent manages and maintains the automobile lease program for Gerdau Ameristeel.

7. The incumbent prepares and files Freight Claim documentation with Transportation Vendors in accordance with policy, and disseminates claim information to Gerdau Amersiteel logistics, commercial, and financial personnel as needed.

8. The incumbent assists in investigating payment discrepancies, resolving issues related to incorrect data entry, and informs appropriate Gerdau Ameristeel logistics and financial personnel of non-conformances and corrective actions as needed.  In the event that a system logic defect is discovered to be the cause of a payment discrepancy, incumbent will advise logistics management and information services to ensure that the defect is addressed.

9. The incumbent perform other related duties as may arise and provides support as needed to shipping locations, sales department or customers.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. All external applicants must be legally eligible to immediately work in the country of hire without current or future sponsorship.  

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Empowering people who build the future.

PRINCIPAL ACCOUNTABILITIES:

1. Responsible for assisting with negotiating proposals, establishing and verifying shipping procedures. 

2. Responsible for assisting with the negotiation of confidential contracts, rates and services, with rail at the most effective cost. 

3. Incumbent also independently analyzes new rate proposals, economic conditions, increases, and rate changes as needed to determine carrier competitiveness.

4. On a daily basis, incumbent works with outside transportation service providers, Gerdau Ameristeel departments and locations, regional transportation managers, and mill shipping supervisors to obtain and provide information to meet logistics needs. 

5. Responsible for reviewing and evaluating, and processing customer, carrier, and company transportation issues.

6. The incumbent manages and maintains the automobile lease program for Gerdau Ameristeel.

7. The incumbent prepares and files Freight Claim documentation with Transportation Vendors in accordance with policy, and disseminates claim information to Gerdau Amersiteel logistics, commercial, and financial personnel as needed.

8. The incumbent assists in investigating payment discrepancies, resolving issues related to incorrect data entry, and informs appropriate Gerdau Ameristeel logistics and financial personnel of non-conformances and corrective actions as needed.  In the event that a system logic defect is discovered to be the cause of a payment discrepancy, incumbent will advise logistics management and information services to ensure that the defect is addressed.

9. The incumbent perform other related duties as may arise and provides support as needed to shipping locations, sales department or customers.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. All external applicants must be legally eligible to immediately work in the country of hire without current or future sponsorship.  

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Provide day to day analysis and reporting of product quality data and Lab results.

DIMENSIONS:

1.         Direct Reports                         None

2.         Scope                                      1 Steel Mill                             

3.         Annual Production                  300,000-3 million tons

NATURE AND SCOPE:

Primary responsibilities include:  General Quality testing, inspection and analysis as required by the product and at the direction of the Quality Assurance Manager.

This position reports to either the Routine Facilitator or Quality Assurance Manager, depending on the mill location.  This position requires a minimum of two years of steel mill or related experience and a high school diploma. Training for the specific tasks will be provided by the site. An aptitude for working with computers and sensitive technical instruments will be a plus.

The incumbent must be able to work in a controlled laboratory environment, and must be able to work independently. Experiance with the use of SAP is preferred.  

The Quality Technician is responsible for daily quality testing requirements, record keeping, reporting and equipment maintenance. The incumbent will be accountable for acquisition (where applicable) and preparation of test samples as well as performing the actual tests and reporting of quality results to the appropriate department. Additionally, the Quality Technician may also be responsible for product inspection.

The Quality Technician will be required to review quality data results and compare them to product requirements. The individual is accountable for notifying the routine facilitator or Quality Assurance manager if there are any problems with the data or inspection of the product.

This position may be required to perform additional duties as assigned by the Quality Assurance Manager.

The incumbent is required to perform all of the above responsibilities in accordance with all applicable laws and polices. The incumbent is required to perform these duties with the highest prudence and regard to safety of health, human life and the environment.

PRINCIPAL ACCOUNTABILITIES:

1. Product Testing and Inspection:

1. 1. Chemical Analysis

1. 2. Mechanical testing

1. 3. Perform product inspection as required

1. 4. Report Offspec or product defects to the Quality Assurance Manager or Routine Facilitator

2. Daily Production Duties:

1. 1. Maintain test equipment to ensure continual operation.

1. 2. Review test results to report on Certified Test Report.

1. 3. Prepare samples in ovens for testing and trials.

3. Other accountabilities will be at the discretion of the Quality Assurance Manager

4. Observe and follow all general and departmental safety rules and regulations.

5. Follow Cardinal Safety Rules.

6. Complete all required annual safety and environmental training.

7. Responsible for spill prevention, containment, response and clean up or assist in clean up of spills.

8. Know, understand, and follow all applicable Federal, State, and Local environmental legal requirements and practices.

9. Utilization of EMM and GBS concepts.

10. Maintain equipment, housekeeping, and 5S in the area.

The incumbent is responsible for his/her safety as well as his/her colleagues, seeking continuous improvement related to employee’s health and safety, environment and process efficiency and customers’ satisfaction with the quality of products and services. All efforts must be directed for preventive actions.

Empowering people who build the future.

Gerdau believes in equal employment opportunity related to all employees and applicants foremployment. It is the policy of Gerdau that there will be no discrimination against any employee orapplicant for employment on the basis of race, religion, color, national origin, citizenship, maritalstatus, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, orother legally protected status. All external applicants must be legally eligible to immediately work inthe country of hire without current or future sponsorship.

If you are vision-impaired or have some other disability under the Americans with Disabilities Act /Accessible Canada Act or a similar law, and you wish to discuss potential accommodations relatedto applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or
recruiting@gerdau.com

#thegerdauwearecreating

This position is open for domestic candidates only.

Human Resource Manager – Midlothian, TX 

 
Starting pay $128,000 - $160,000 / year based on experience plus annual bonus. Benefits start on your first day! 

We Have:

A strong global presence with mills that transform millions of metric tons of raw material to produce steel beams, flat-rolled steel, merchant bar, rebar, spikes, and wire used by the automotive, appliance, construction, machinery, and equipment industries.    
A thriving culture that embraces diversity, encourages innovation, and creates products that serve humanity.  
An environment that values teamwork, safety, and sustainability. 
A commitment to continuous improvement and the belief that we can create a better future for our employees and our global community by investing in people, processes, and technology. 
 

We Offer:

You Have:

Your Purpose: 

Your Work: 

Job Specifications:

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

BASIC FUNCTION (Primary Purpose):

This position has 2 primary responsibilities.  The first is medium range (3-6 month horizon) strategic forecasting by key segment, country, and product distinction.  The second is the optimization, tracking and conflict resolution of order placement and management within the near term (approx. 60 days).  This position has significant impact on the profitability of Gerdau as well as positioning the company in the market to achieve our long term strategic objectives.

Primary Duties & Responsibilities:

Scope (brief description)

This position will participate in forecasting volume at the segment, sector, country and product level and then track adherence to that forecast

up to and including

Scope will include all aspects of revenue generation (vmi, edi, concentration on key associations (NASA), eGerdau intelligence, etc).  One measure of success will be a smooth pass off of sales orders to FM during the block closing process.

Significant use of AI and predictive tools will be required in addition to leveraging the existing data available in SAP/SEP/eGerdau, Marketing and external data sources, and Power BI visualizations.

Supervisory Responsibilities & Reporting Structure

• Supervises who (level and number):  None
• Reports to:  Sales Process Manager

Qualifications and Educational requirement(s):

Minimum 6 or more years of sales or fulfillment experience and a four year degree from an accredited college or university

Preferred experience in the following industries (not required): 1. Steel, 2. Metals Manufacturing, 3. Commodities pertaining to the steel industry, 4. Metals Distribution/Service Centers, 5. General Manufacturing (industrial, car).

Preferred degree in the following areas (not required):  1. Business with Sales and Marketing emphasis, 2. Engineering or Material sciences

Minimal travel is required –estimated at 2 to 4 overnights per quarter.

Metrics for success:

1. Forecast Accuracy for profitability and volume.
2. EBITDA vs forecast and PEX goals
3. Customer satisfaction (surveys, individual supplier scorecards)
4. Inventory Accuracy
5. Production Schedule Integrity
6. ?  Geographic concentration by mill i.e. mills shipped by truck?

Caster Operator

Do you have a working knowledge of manufacturing tools and procedures? Are you detail-oriented with the ability to organize and prioritize? Do you like trouble shooting and solving problems? Join us as we build the future and the Gerdau We Are Creating.

$63000 - $73000 / year which includes biweekly hourly pay( $19.72 hr after 90 days $22.91 hr), production bonus, shift premium, and 354 hours of annual overtime built into the schedule. 

We Have:

• A strong global presence with mills that transform millions of metric tons of raw material to produce steel beams, flat-rolled steel, merchant bar, rebar, spikes, and wire used by the auto industry, appliance, construction, machinery, and equipment industries.    
• A culture that welcomes diversity, encourages innovation and creates products that serve humanity.  
• An environment that values teamwork, safety, and sustainability. 
• A commitment to continuous improvement and the belief that we can create a better future for our employees and our global community by investing in people, processes, and technology. 

We Offer:

• Comprehensive Medical, Prescription, Dental, Vision Plans – Eligible upon 1st day of hire 
• Health & Dependent Care (Flexible Spending Account) 
• 100% Matching 401K up to 6% 
• Life/Accidental Life Insurance 
• Parental Leave
• Bonuses 
• Health Advocate Services 
• Employee Assistance Program 
• Tuition Reimbursement Program 
• Career Path System and Training 
• An empowering and open culture with the opportunity to grow and create 

You Have:

• Must pass entrance exam. 
• 1-3 years industrial/manufacturing experience.

• Flexibility to work a 12hr rotating shift, days, nights and two weekends a month. (Dupont Schedule) 

• General math skills, advanced problem solving, analytical skills, use charts, schedules, computer and touch screens in addition to follow instructions.
• Ability to use adjustable controls in regulating the continuous process through interpretation of measuring instruments and gauges.
• Ability and willingness to work as part of a self-directed team with limited supervision.
• People leadership skills and ability to lead by example

Your Purpose:

You will be responsible for monitoring computer screens and panels in the pulpit to operate the Steel Pourer equipment and monitoring the flow of the liquid steel from the ladle to the tundish. You will also maintain the area and stock consumables.

Your Work:

• Make “piggybacks” to swap empty ladles with full ladles during the continuous casting process.
• Assist Caster Operators and maintenance on down days, start-up and shut down of casting sequences.
• Periodically use oxygen lances to open ladles and clean the tundish.
• Perform routine daily maintenance/inspection of torches, lances and other equipment.
• Set up tundishes and other equipment for future casting sequences.
• Complete pre-start-up check sheets to assure the equipment is ready for operation.
• Stock consumables and maintain tools in the area according to 5S principles.
• Perform daily preventative maintenance, record and inspections on vehicles/mobile equipment to include fueling, cleaning, checking and adding fluid as needed.
• Operate mobile equipment and overhead cranes using handheld controls to transfer product/material.
• Maintain communication with coworkers through to-way radio and hand signals.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Excellent pay, shift differential, biweekly bonuses. Benefits start on your first day!

We Have: 

• A strong global presence with steel mills that transform millions of metric tons of raw material to produce steel beams, flat-rolled steel, merchant bar, rebar, spikes, and wire used by the auto industry, appliance, construction, machinery, and equipment industries.    

• A culture that welcomes diversity, encourages innovation and creates products that serve humanity.  

• An environment that values teamwork, safety, and sustainability. 

• A commitment to continuous improvement and the belief that we can create a better future for our employees and our global community by investing in people, processes, and technology. 

We Offer:

• Comprehensive Medical, Prescription, Dental, Vision Plans – Eligible upon 1st day of hire 
• Health & Dependent Care (Flexible Spending Account) 
• 100% Matching 401K up to 6% 
• Life/Accidental Life Insurance 
• Health Advocate Services 
• Parental Leave
• Employee Assistance Program 
• Tuition Reimbursement Program 
• Career Path System and Training 
• An empowering and open culture with the opportunity to grow and create

You Have:

• High School Diploma or GED
• A minimum of two years of quality lab testing experience in an industrial environment.
• Experience with MS Office and SAP preferred
• Experience with sensitive manufacturing technical testing instruments.
• Strong mental math abilities
• Ability to work a rotating 12-hour shift, days, nights, and two weekends a month. 

Your Purpose:

You will provide daily analysis and reporting of product quality data and lab results and provide valuable information with regards to the manufacturing quality of Gerdau's steel. You will conduct product testing and inspections for chemical analysis and mechanical testing and report defects or off-specification results and report findings to the management team.

Your Work:

•   Maintain test equipment to ensure continual operation.
•   Review test results to report on Certified Test Report.
•   Prepare samples in ovens for testing and trials.
•   Observe and follow all general and departmental safety rules and regulations.
•   Maintain spill prevention, containment, response, and clean up or assist in clean up.
•   Utilization of Expense Management Matrix and the Gerdau Business System concepts.
•   Maintain equipment, housekeeping, and apply the 5S methodology in the area.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status. 

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com

Elevate Your Career with Us!

Are you ready to join a dynamic team and contribute to the success of our state-of-the-art rolling mill? As a Manufacturing Associate, you’ll play a crucial role in maintaining equipment operations, safety standards, and overall quality. Plus, with our competitive compensation package, you’ll enjoy an impressive earning potential!

Why Choose Us:

• Competitive Compensation: $63000 - $68000 / year which includes $19.72 an hour and after 90 days increases to $21.32, biweekly production bonus, shift premiums, and 354 annual hours of built in overtime.
• Growth Opportunities: We value your desire to learn and grow. Take on new roles and advance within the company.
• Work-Life Balance: Our rotating shift schedule ensures flexibility, including weekends.
• Cutting-Edge Technology: Work with heavy mobile equipment, overhead cranes, cab cranes, and torches.
• Supportive Environment: Join a team that values safety, teamwork, and excellence.

Your Qualifications:

• Successful completion of an entrance exam.
• 1-3 years of manufacturing or industrial experience.
• Basic computer skills.
• Ability to interpret instructions and use adjustable controls, HMI’s, measuring instruments, and gauges.
• General math skills and advanced problem-solving abilities.
• Comfort with charts, schedules, and touchscreens.

Your Responsibilities:

• Equipment Maintenance: Ensure smooth operations by maintaining equipment and addressing any issues promptly.
• Safety First: Observe safety protocols at all times, contributing to a secure work environment.
• Housekeeping: Keep the work area clean and organized.
• Collaboration: Assist the maintenance team as needed.
• Quality Inspections: Participate in saw blade changes, roll changes, and inspections.

Join us in shaping the future of manufacturing! Apply today and be part of our success story.

Gerdau believes in equal employment opportunity related to all employees and applicants for employment. It is the policy of Gerdau that there will be no discrimination against any employee or applicant for employment on the basis of race, religion, color, national origin, citizenship, marital status, sex, age, sexual orientation, genetic information, gender identity, veteran status, disability, or other legally protected status.

If you are vision-impaired or have some other disability under the Americans with Disabilities Act / Accessible Canada Act or a similar law, and you wish to discuss potential accommodations related to applying for employment at Gerdau, please contact our Talent Acquisition Team at (866)-788-2798 or recruiting@gerdau.com